|
Specifications:
Rated Voltage:
A piezo buzzer is driven by square waves (V p-p).
Operating Voltage: For normal operating. But it is not
guaranteed to make the minimum SPL under the rated voltage.
Consumption Current: The current is stably consumed under
the regular operation. However, it normally takes three times of current
at the moment of starting to work.
Capacitance: A piezo buzzer can make higher SPL with
higher capacitance, but it consumes more electricity.
Sound Output: The sound output is measured by decibel meter. Applying
rated voltage and square waves, and the distance of 10 cm.
Rated Frequency: A buzzer can make sound on any frequencies,
but we suggest that the highest and the most stable SPL comes from the
rated frequency.
Operating Temp.: Keep working well between -30¢J and
+70¢J.
How to choose:
Driving methods:
AZ-xxxxS-x series with built drive circuit will be the best choice when
we cannot provide frequency signal to a buzzer, it only needs direct current.
Besides, there are different tone nature for you to choose, such as continuous,
fast pulse, and slow pulse.
Dimension: Dimension affects frequency, small size result
in high frequency.
Voltage: Driven by square waves (V p-p), the higher voltage
results in the higher SPL.
Pin Pitch: The numerous spec. for the piezo buzzers lead
to the difficulty in finding a spec. in facsimile, therefore we suggest
that you can firstly choose a spec. with the same pitch and similar frequency.
+886 2 8866-5255 ext. 200 Michael Mail
us / Gmail |
|
